Skip to content
Ring (562) 647-6550

Service · Whittier

Gas plumber and backflow testing in Whittier

Gas pipe and backflow assemblies sit under tighter rules than most plumbing. Here is who handles them, which city office to ask, and how we set up the visit.

Last changed

Ask for a quote

Gas meter, shutoff valve, flex connector to a range, and a water heater branch.

Anything that carries natural gas, or protects the drinking water supply from your sprinklers, belongs to a contractor, and usually to a permit as well. We arrange the plumber for new gas runs, appliance hookups and backflow tests in Whittier and the surrounding cities. See the full range on the home page.

Which city office issues a gas permit near Whittier?

Each city has its own building counter, and two of them lean on Los Angeles County staff. Where a permit is needed, the plumber normally files it, but you will want to know whom to ask. These are the contacts we found on official city and County pages.

  • Whittier: Building and Safety Division, 13230 Penn Street, (562) 567-9320.
  • Downey: Building and Safety Division inside City Hall on Brookshire Ave, (562) 904-7142, shut on Fridays.
  • Norwalk: Building and Safety, 12700 Norwalk Blvd, (562) 929-5733.
  • Pico Rivera: Building and Safety, 6615 Passons Blvd, (562) 801-4360.
  • La Mirada: a County contract city. County Public Works does plan check and inspections, local office (562) 943-0131.
  • Santa Fe Springs: Building and Safety, (562) 868-0511 extension 7560. Closed Fridays.
  • Hacienda Heights: unincorporated, so County Public Works, through the La Puente district office, (626) 961-9611; confirm by phone which office handles your address.

Call ahead, because counters change hours. What an inspector charges for is covered under plumber inspection cost.

Why is gas work reserved for a contractor?

A bad joint in a gas line leaks quietly into a wall or crawl space, and the outcome can be fire or an explosion. The state's contractor rules reflect that. Permit jobs call for a license regardless of size, as does any job with labor and parts that reach $1,000. A handyman cannot legally cover that ground.

Request the license number before work begins, then verify it through CSLB. Next, ask who files the permit, what pressure test follows, and when does the inspector arrive? If the answers are vague, find someone else. We cover pricing in gas line cost and the work in gas line installation.

What jobs does a gas plumber take on?

Common jobs include running a branch to a new range, adding a dryer stub, a patio fire pit or barbecue drop, swapping a worn flex connector, reconnecting a new water heater, and tracing a suspected leak behind a wall. Larger remodels may reroute a whole line.

Pipe sizing decides whether a flame behaves. When several appliances share one run, the diameter and length determine whether each gets enough supply at the same moment. The plumber calculates the load, chooses an approved material such as black iron or CSST, and pressure tests before walls close. For the rulebook side, read residential gas piping codes.

Gas odor indoors, what is the first move?

Get everyone outdoors before doing anything else. Take people and pets, leave doors as they are, and avoid switches, lighters and indoor phones. Fire, a loud hiss or a dizzy family member means 911. Otherwise, once you are clear of the house, SoCalGas takes leak reports at 1-800-427-2200.

Flow chart: get outside, then call 911 or the gas utility.

SoCalGas supplies every city on our list, per its own cities document. Crews from the utility secure the scene. After that a plumber can hunt down and cure the cause. Do not relight pilots after a suspected leak. If an earthquake is what scared you, after a quake, our notes on shutting off gas following an earthquake say when closing the valve makes sense.

What is backflow, and what does a test measure?

Backflow is water moving the wrong direction in a pipe, pulling whatever sits downstream back toward the street main. Lawn sprinklers, fire lines and commercial machinery are typical risks, with soil, fertilizer or chemicals at the far end. A spring-loaded assembly of check valves and a relief valve stops it.

During the test a technician opens each valve in sequence and attaches a calibrated gauge to read pressure drops. The result is pass or fail for each component. Failed parts get rebuilt, then the assembly is retested and a report is produced. Details sit in how backflow testing works and backflow prevention testing.

Does my property need an annual backflow test?

It depends on what is connected. Many suppliers require a yearly test for irrigation, fire sprinkler and some commercial connections, and they usually mail a notice with a deadline. Ordinary indoor plumbing in a single-family home typically does not need one. The supplier's records show what applies to your address.

Which supplier you have depends on your street. Golden State Water serves parts of Norwalk, Downey, La Mirada, Santa Fe Springs, Artesia, Cerritos and Hawaiian Gardens, while Whittier has the city system plus others. Check the bill and call the number printed on it. We handle the booking side through backflow testing services, while business owners can turn to commercial backflow testing instead.

Who may test a backflow assembly on my property?

Most suppliers take reports from approved testers alone, typically people with a backflow tester certification, and the rules vary from one supplier to the next, so check yours. Where the County's waterworks districts apply, County Public Works runs its own backflow prevention program.

So ask the supplier for its list before you book. The test result is sent to the supplier, sometimes with a small filing fee. Keep your copy for next year. If a device fails, you receive a quote for repair or replacement as a separate item, and the retest follows. Price drivers are explained under backflow device testing cost.

Should an older mobile home get a plumbing and gas check?

Yes, if you are buying, if the unit has been shut for a while, or if you smell gas. Gas connectors, supply lines under the skirt and the water heater closet are the usual weak spots. Our guide to mobile home plumbing inspection lists what a visit covers.

Common questions

Can a handyman connect my new stove to gas?

When a permit is involved, or the bill for labor and materials will pass $1,000, California reserves the work for a contractor whose license the state has issued. Swapping a gas range onto an existing approved connector sometimes lands in a gray area, so ask the building office. When in doubt, a plumber should do it.

How will I know a backflow test is due?

Look for a letter or a tag on your account from the water supplier. The assembly is a metal body, often bronze or brass, with two shutoff handles, close to the meter or on the sprinkler feed line. Still unsure? Phone the supplier with your address.

Does the plumber test and repair in one visit?

Often they do, but they are separate steps. The test measures. A repair or replacement is extra, and a written quote should arrive before parts are changed. After a repair the supplier typically wants a retest, plus a fresh report on file.

What helps when I phone in?

Give your address, what the appliance or device is, what you saw or smelled, and any letter from the gas or water company. Photos of the meter, the shutoff or the assembly speed things up. Calls are answered 9am to 5pm on weekdays. The price request form takes details whenever you like.

In this section

  • Backflow testing cost

    What a yearly backflow test costs for a home with a sprinkler or pool line, what happens when a device fails, and how to avoid a shutoff…

  • Backflow prevention testing

    Backflow prevention testing for Whittier homes and small properties: what the device does, why the water supplier sends a notice and what…

  • Backflow testing services

    What a backflow testing service covers, how the report reaches your water supplier, scheduling, repairs, permits and what to do when a…

  • Permits, codes and inspections

    How a backflow test is carried out, which devices at a home or business need one each year, what to prepare and what happens if the device…

  • Permits, codes and inspections

    What a plumber checks in a mobile or manufactured home before you buy or after a leak: supply lines, drains under the belly, gas, the…

  • Costs

    What camera inspections, backflow tests and permit inspections cost around Whittier, which permit office to call, and what a fair…

  • Residential gas piping codes

    Which code covers home gas piping in California, the materials, shutoff valves, pressure test and inspection steps a city expects, and who…

References